Hi all!
I have a USG60 that has a modem connected to the WAN 1 port, then a PC on LAN1 and a server on the DMZ port. All work correctly.
I added a powerline that can act as an access point for the wifi devices: TP-LINK TL-WA855RE http://www.tp-link.us/products/details/cat-5508_TL-WA855RE.html, this device is really impressive and the wifi coverage is simply WOW!!! for 26 Euro and it has all I need (scheduling power ON/OFF wifi, led, ACL, and more).
I tried to set it at the LAN2 but it worked only 2 times.
LAN1 is 192.168.1.1 and the PC is 192.168.1.2
DMZ: 193.167.0.1 -> server 193.167.0.2
DHCP ON on the firewall
LAN2 set as 192.168.2.1 -> powerline access point wifi 192.168.2.2 -> 3 devices 192.168.2.3-4-5 (one of this is a printer with wifi) IP manually set on devices.
I want that wifi devices can comunicate between them and not with the LAN1 and DMZ and they must have access to the internet.
first test: worked correctly but no way to comunicate to the printer via wifi (I'm pretty sure the config on the printer was wrong).
reseted the powerline due to my error on IP config...then retried the configuration and finally all wifi devices can talk between them but cannot go to the internet (same config on the USG60 as before).
After 12 hours of retries etc...I definitelly set the powerline access point wifi as LAN1 cause there where issues about MAC/IP assignation on the powerline cause I want to set manually but at least one device had no IP or a duplicate so surelly something went wrong.
now the LAN1 on the USG is, as always, DHCP ON on the LAN1 with IP/MAC binding OFF and the powerline has the IP 192.168.1.6 (I set it manually on the GUI). DHCP is ON also on the powerline and devices as the IP assigned by the powerline.
all work great but I have tons of logs as this:
No. Date/Time Source Destination
Priority Category Note
Message
1 2016-05-13 21:01:03 255.255.255.255:67
notice secure-policy ACCESS BLOCK
Match default rule, DROP
note that the SOURCE is empty but the destination is port 67 and IP 255.255.255.255.
What's wrong?
If I disconnect the powerline from the USG60 these logs stop.
↧