Hi all
I'm new to the Zyxel USG40, but so far have managed after about half a day to get the firewall configured for the most part.
The one thing I can't work out, is how to allow LAN clients to access the ADSL modem, which is the other side of the USG40. So my setup is:
ADSL modem = 192.168.0.1, which is then connected to the WAN port on the USG40
USG40 WAN = 192.168.1.2
USG40 LAN1 = 192.168.1.1
DHCP leases: 192.168.3.x (with gateway of 192.168.1.1)
masks are all 255.255.0.0
Do I need something like a security policy or a policy route to get from say 192.168.3.100 to 192.168.0.1? Without this, it is a pain to access the ADSL modem interface to change settings there.
Thanks for any pointers!
↧