VOIP in USG series with FREEVOIPDEAL voip provider
A question for the Zyxel gurus: how to set the voip service to work with freevoipdeal voip service?? there is a phone connected to the USG and is correctly configured cause if a bypass the usg I can do...
View ArticleUSG 50 routing help needed - DVR
We replaced a Lynksys RWL200 with a ZyWall USG50. We've got a security DVR in the office which we need to make accessible from anywhere on the internet. We don't have a static IP, but we're using...
View ArticleI need help with IPv6 between a USG50 VLAN, LAN1 and LAN2.
In setting up a VLAN on my switch in quickly became apparent that I would also have to set up a VLAN in my USG50. I setup vlan30 in the USGl with a tag of 30 using 10.10.30.1/24 for the VLAN IPv4...
View ArticleZyWall WAN to LAN throughout
I saw the review at smallnetbuilder that zywall 110 wan to lan throughout only 600plus mbps. Anyone have real life experience with this firewall? Can it reach near 900Mbps with default firewall on?
View ArticleRouting Upnp
I have a upnp(DLNA) media server on one subnet 192.168.0.x and a computer that I want to have access to it on another. 192.168.1.x. I believe these services use SSDP which in turn is using UDP. I don't...
View ArticleUSG200 VLAN Assistance
Hello Everyone - I would like to thank you all in advanced for your help and support. Allow me to explain the location where the equipment will be as well as the usage so as to make things easier. The...
View ArticleMAC Address issues
Hi folks, After a long time of issues with Zyxel USG 20 + Technicolor Comcast modem I found out that the modem somehow has an issue with the MAC address of the Zyxel. Other routers works fine and...
View ArticleNo IPv6 address on PPPoE interface
I have followed this instructions: http://www.dslreports.com/forum/r28282387-USG-100-IPv6-configuration-for-LuxDSL-P-T-Luxembourg- But the test pages show no IPv6 address. The problem is: My PPPoE...
View ArticleSite-to-Site IPSec VPN between USG 20 & 50, behind ISP modem/routers
Hi, I have to connect a Site-to-Site IPSec VPN between an USG20 and an USG50, which are both behind ISP modem/routers. I can't put the ISP modem/routers in bridge to keep the home phones working... I...
View ArticleUSG20W Bridged LAN-WLAN IPSEC VPN
Having difficulty getting the above config to work. Ipsec VPN between USG20W and USG50 works fine when LAN-WLAN not bridged. However, when I install the bridge the VPN stops working. Assume Policy...
View ArticleBell IPTV Next Phase
Getting ready to use USG300 for Bell Alliant FibreOP TV. a. internet on VLAN35 b. TV on VLAN 34 - ISP ignores packets with less that 802.1p level FOUR assigned. c. Assigns IP address to the TV receiver...
View Articlesam1216 and p793h-v2 connection
hi everybody. I have a problem. I have an IES1000 DSLAM with a SAM1216-22 shdsl card and some dsl modems(P793h-v2). I want to make connection between modems and DSLAM. I could not do that. I have no...
View ArticleWindows Mobile 6.5 - L2TP/IPSec VPN to USG20w
Hi! I have an issue that ZyXel could not resolve, I have a ZyXel USG20w at a customers site and a handheld device with windows mobile 6.5 which I would like to connect via VPN to it, L2TP/IPSec is...
View ArticleAny known issues with USG 20 and SIP? (USG 50 seems fine)
We sell IP PBXes and commonly have a situation where the PBX is installed a customer's main office with a remote office or two connecting their phones remotely. I ran into a weird situation yesterday...
View ArticleIs there a way to meter usage?
I'm looking for a way to meter usage by interface (LAN1, LAN2, etc.) on a daily basis. Ideally after the allotment is used, the connection still works but slows considerably. It's for a vacation rental...
View ArticleHow can I see VLAN ID tag
I use this how to, to set VLAN ID 7 external. http://www.zyxeltech.de/files/T-Home_VLAN7_USG-200_Setup2.pdf But I do not know, what my modem is doing. I have captured wan1, vlan7, Tele_ppp. Wan1 is...
View ArticleFree IPv6 course for those interested
Overview Attendees to Alvaro's webinar class will get an overview of IPv6. This includes updated information about why they should be interested in IPv6, how to tackle the transition to IPv6, and what...
View ArticleZyxel USG and Zywall max packets per second
as title: is there an hestimate of the max packets could be processed by the zywall and usg series with firewall on and no utm services? looking at some datasheets of mikrotik and other vendors you can...
View ArticleUSG20 Dropping WAN
I have a USG20 that is intermittently dropping the WAN. It is connected to a probably 10 year old (at least) Netopia T1 router. I also have a similar setup in another location with the same old Netopia...
View Articlestrange logs usg 100 with no pc, server, nas active: internet only!!!
Please help me for this log if you can: details: this is the usg 100 log from 2.26 am to 8 am: modem/router dsl connected to internet and the usg 100 connected to it and stop, no pc, no nas, no server,...
View Article