USG v4.20 New Features Summary
USG v4.20 may be released end of Aug. New Features Summary: - Fixed USG low throughput issue - Content Filter Enhancement - Geo IP blocking - HTTPS / SSL Enhancement - Device HA Pro - Hotspot...
View ArticleChange of ZyXEL password
Hi, I changed my password by adding a ! on the end of an existing password which in hindsight was stupid. Now I can't login. I have recreated the issue on a user on another router (with a backup user)...
View ArticleUSG VPN backup on Lan to Lan Failure ?
Hello, I have a little question about the possibility to set a VPN connection as a backup. In fact, I have 3 remote sites (1 USG on each site) that are connected via a dedicated LAN link. In case of...
View ArticleZYWALL 310
Dear all, I would like to ask for any help according to this problem: Our company network has several different zones. My aim is to manage my APs (LAN4 - see attachment, 5 UniFi AP Pro units) from our...
View ArticleUSG20W-VPN New Firmware
So i have my oldish/older USG20w-VPN from a few years ago when i bought it and im running 3.3 at the moment. I went to go on the site just to see if there is anything new from 3.3 and now there is 4.16...
View ArticleZyxel USG60 setup
I must be missing something simple...we're upgrading from an old Zywall to a USG60 and I'm having trouble getting basic routing to work. Our LAN is 192.168.0.x and the USG60 is 192.168.0.9. It's setup...
View ArticleUSG110 to USG100 site-to-site IPSEC vpn will not pass traffic
Hello All, I just replaced an existing node (USG100) with a USG110 on site 1 for performance reasons. Our second site also has a USG100. The two USG100s have previously used a site to site ipsec vpn...
View ArticleActive Passive HA Mode management IP - how to route ?
I have 2 USG310's in Active Passive mode with 192.168.0.1 as the monitored interface (with .9/.10 as management ips). My normal network is 10.0.0.1...How do i route the passive USG310's management IP...
View ArticleUSG110 wan issue with FIOS ONT
I have a new USG110 that I am setting up for FIOS. I have had the ethernet port turned on the ONT but whenever I plug in the wan1 port I do not get a link light on either end. I have tested the cable...
View ArticleUSG50 weird traffic on PASSIVE link
Hello, I have a USG50 configured with one Active and one Passive wan link. It works just fine. I would not expect to see any traffic on the Passive wan link but every day I see about 250KB Tx and Rx...
View ArticleZyxel NWA1100 firmware recovery
I had a powerfail during firmware upgrade and now my Zyxel NWA1100 is booting continously. Now I want to connect the device to a PC serial port via external TTL to RS-232 and try to upload an image...
View ArticleZywall USG site to site VPN with VLAN
Hi, Anybody have an idea for my post ? https://www.dslreports.com/forum/r30903513-VLAN-over-VPN-with-Zywall-Can-ping-gateway-but-nothing-else At this moment, I can ping from my second Zywall (Zywall...
View ArticleUSG v4.20 New Features Summary
USG v4.20 may be released end of Aug. New Features Summary: - Fixed USG low throughput issue - Content Filter Enhancement - Geo IP blocking - HTTPS / SSL Enhancement - Device HA Pro - Hotspot...
View Articleip_Sec setup
I am trying to setup a vpn tunnel from a static wan ip (no router just a cloud remote desktop server with a static ip) to a usg with a static ip. I need the rdp server to have the ip of the router...
View ArticleSeveral VLANs/subnets via single physical interface on USG100?
Hi guys, I've got a question and hope that someone can help me. I've got an USG100 which now has two internal interfaces configured for two networks (say guest and production). On the network switches...
View ArticleNext Gen USG 4.20 Firmware Thoughts
Have upgraded a few of our USG40s and USG20-VPNs to the v4.20 firmware. So far we've had no problems. But you definitely have to do a couple things once you upgrade.... Also noted a couple CPU overload...
View Articlecan I set Zyxel USG60 to block certain *file types*?
I'd like to use the Zyxel USG60 to prevent users from accessing/downloading files with certain extensions, such as .BAT or .SCR files. Is there a way to do this using the Content Filter's Blocked URL...
View ArticleUSG 50/20w site-to-site - No rule found, Dropping ESP packet
I've been having this problem for awhile with a site-to-site connection between a usg50 and usg20w. Both are on 3.30(B*S.7). The connection works great without any errors or alarming log entries. After...
View ArticleStrange wireless issue
Has anyone ever seen this issue? I have a cellphone (Moto X 2nd Gen) that suddenly won't connect to my USG40W wireless. The logs show this: "STA is blocked by pre-Auth Failed. MAC [cellphone MAC...
View ArticleIPv6 WAN Configuration - /56 block
I'm finally getting around to doing some IPv6 testing on our USGs and by default TWC will hand out /64 blocks (which you aren't supposed to 'split' across subnets). IN order to have VLANs and subnets,...
View Article